Air ducts are hollow tubes either square, rectangular or round, typically made of sheet metal. They are in charge of transporting cool or heated air around a building. The ducts generally frame a part of a building’s air conditioning and ventilation systems. Cleaning air ducts ought to be a part of your home maintenance system. It is necessary to keep your house maintained regularly as these maintenance helps with the effective functioning of your ducts.
There are several advantages associated with cleaning your air ducts. Here is one of them; as per the United States Environmental Protection Agency, the removal of as little as four tenths of an inch of dust from the coils of an air duct will cut the use of energy by as much as 21 percent. This adds up to huge savings on your electricity bill.
Duct cleaning is key to keeping up healthy air inside a building. Toxins, dust, mold, rodent droppings, pet dander, pollen and other allergens are ordinarily found in air ducts while being cleaned. If the air ducts are not cleaned on a regular basis, these particles are extinguished into the air for others to breathe in. Regardless of the fact that those breathing in the polluted air do not suffer from allergies, such particles can cause serious disease.
The air duct cleaning process is simple; here is a brief guideline.
PREPARATION
Before cleaning the ducts, cover each heat vent with a plastic pack. This pack acts as a protection mechanism from any dust generated amid the process of cleaning; it also provides an approach to decide whether the duct cleaning machine has appropriate suction.
Prior to duct work begins, an expert will drill a sizable hole in the trunk of the furnace. The hole is covered with a large vacuum tube, and attached into place. A high-powered vacuum cleaner associates with the tube and used to remove the debris and dirt out of the ductwork.
CLEANING
A small hole is made into the furnace, and a brush with a long handle is used to push through the ducts and withdraw any remaining debris. There are various objects that can that can find their way into an air duct, this causes a blockage which influences the productivity of the system’s cooling and heating. A scoping camera is used to find any blockages with the goal that it can be removed. If the blockage is severe the duct may need to be disassembled for removal.
FINISHING
After cleaning the ducts and any blockages have been removed, the vacuum is disconnected from the furnace trunk, and the plastic bags are taken off the vents. The duct cleaning process is completed with any holes that were made being carefully plugged to keep them airtight. Any ducts that were taken apart to clear blockages are put back together, and the hole in the furnace trunk is patched up with a large metal plate.
When the duct cleaning process is completed and blockages have been removed, the vacuum is disconnected from the furnace trunk, and the plastic bags are removed off the vents. The duct cleaning process is finished with any holes that were made being precisely plugged to keep them airtight. Any ducts that were taken apart to clear blockages are assembled back, and the hole in the furnace trunk is fixed up with a large metal plate.
4467 W. Lawrence Ave
Chicago , IL 60630
and surrounding areas
Service Available 24/7
Share On: